Concrete
(For details on the foundation of the screw), it is best suited for complex and heaving ground, to set design on the side. Strip foundations, which we chose for your bath, make simple enough, but the design is obtained very reliable and durable. To dig a trench in the basement tape, in which is poured a layer of sand (15-20 cm), throw it with water and tamped. Next comes a layer of crushed stone of the same thickness, then laid rebar and poured concrete. The height of the concrete layer may be equal to the height of the cap and base can be make bricks in 4-5 series, paving over concrete waterproofing, such as roofing material. In a series of masonry (2-3) make sure to vent produhi. Walls bath best material for the walls of baths are the logs and timber. Eco-friendly tree, it 'breathes', keeps well and gives it warmth.
Natural stone, brick, concrete and other Arbol variations used in cases where these materials are more available than wood. The advantage of stone structures – durability and a large fire. In recent years, thanks to the simplicity and the possibility of using various inexpensive materials, a large widespread skeletal Wall bath. During the construction of a log sauna salary (first crown) are made of thicker timber and put it on a layer of waterproofing. Underside of the salary to be processed with antiseptic and cover waterproof mastic You can use the cross bars – the lining. If the frame is made of logs, it is best to perform the corners 'in the cup', so that the ends extend beyond the walls that protect against wind and rain.